Zeolite Synthesis in the Presence of Metallosiloxanes for the Quantitative Encapsulation of Metal Species for the Selective Catalytic Reduction (SCR) of NOx.

Metal encapsulation in zeolitic materials through one-pot hydrothermal synthesis (HTS) is an attractive technique to prepare zeolites with a high metal dispersion. Due to its simplicity and the excellent catalytic performance observed for several catalytic systems, this method has gained a great deal of attention over the last few years. While most studies apply synthetic methods involving different organic ligands to stabilize the metal under synthesis conditions, here we report the use of metallosiloxanes as an alternative metal precursor. Metallosiloxanes can be synthesized from simple and cost-affordable chemicals and, when used in combination with zeolite building blocks under standard synthesis conditions, lead to quantitative metal loading and high dispersion. Thanks to the structural analogy of siloxane with TEOS, the synthesis gel stabilizes by forming siloxane bridges that prevent metal precipitation and clustering. When focusing on Fe-encapsulation, we demonstrate that Fe-MFI zeolites obtained by this method exhibit high catalytic activity in the NH3 -mediated selective catalytic reduction (SCR) of NOx along with a good H2 O/SO2 tolerance. This synthetic approach opens a new synthetic route for the encapsulation of transition metals within zeolite structures.

Calcium Looping: On the Positive Influence of SO2 and the Negative Influence of H2O on CO2 Capture by Metamorphosed Limestone-Derived Sorbents.

The CO2 capture performance of sorbents derived from three distinct limestones, including a metamorphosed limestone, is studied under conditions relevant for calcium looping CO2 capture from power plant flue gas. The combined and individual influence of flue gas H2O and SO2 content, the influence of textural changes caused by sequential calcination/carbonation cycles, and the impact of CaSO4 accumulation on the sorbents' capture performance were examined using bubbling fluidized bed reactor systems. The metamorphosed limestone-derived sorbents exhibit atypical capture behavior: flue gas H2O negatively influences CO2 capture performance, while limited sulfation can positively influence CO2 capture, with space time significantly impacting CO2 and SO2 co-capture performance. The morphological characteristics influencing sorbents' capture behavior were examined using imaging and material characterization tools, and a detailed discussion is presented. This insight into the morphology responsible for metamorphosed limestone-derived sorbent's anomalous capture behavior can guide future sorbent selection and design efforts.

Triphenylphosphine-Based Covalent Organic Frameworks and Heterogeneous Rh-P-COFs Catalysts.

The synthesis of phosphine-based functional covalent organic frameworks (COFs) has attracted great attention recently. Herein, we present two examples of triphenylphosphine-based COFs (termed P-COFs) with well-defined crystalline structures, high specific surface areas, and good thermal stability. Furthermore, rhodium catalysts with these P-COFs as support material show high turnover frequency for the hydroformylation of olefins, as well as excellent recycling performance. This work not only extends the phosphine-based COF family, but also demonstrates their application in immobilizing homogeneous metal-based (e.g., Rh-phosphine) catalysts for application in heterogeneous catalysis.

Shaping of ZSM-5-Based Catalysts via Spray Drying: Effect on Methanol-to-Olefins Performance.

Shaping and optimal compositional formulation are major challenges in the successful industrial application of heterogeneous catalysts. The choice of components during formulation plays a vital role in endowing the final catalyst's mechanical strength, durability, and lifetime and may even affect activity and selectivity. Herein, we evaluate the application of spray drying to manufacture spherical ZSM-5-based catalysts and their applicability in the methanol-to-olefins process. Several critical parameters of the spray drying process and various aspects related to catalyst formulation (binder, zeolite, and clay) are investigated. Chemical composition and structure of the clay matrix substantially influence the catalytic performance.

Nanosheets of Nonlayered Aluminum Metal-Organic Frameworks through a Surfactant-Assisted Method.

During the last decade, the synthesis and application of metal-organic framework (MOF) nanosheets has received growing interest, showing unique performances for different technological applications. Despite the potential of this type of nanolamellar materials, the synthetic routes developed so far are restricted to MOFs possessing layered structures, limiting further development in this field. Here, a bottom-up surfactant-assisted synthetic approach is presented for the fabrication of nanosheets of various nonlayered MOFs, broadening the scope of MOF nanosheets application. Surfactant-assisted preorganization of the metallic precursor prior to MOF synthesis enables the manufacture of nonlayered Al-containing MOF lamellae. These MOF nanosheets are shown to exhibit a superior performance over other crystal morphologies for both chemical sensing and gas separation. As revealed by electron microscopy and diffraction, this superior performance arises from the shorter diffusion pathway in the MOF nanosheets, whose 1D channels are oriented along the shortest particle dimension.

Synthesis, characterization and properties of a glycol-coordinated ε-Keggin-type Al13 chloride.

Herein we present the first example of a glycol-coordinated ε-Keggin Al13 chloride (gl-ε-Al13), which is the first chelated version since discovery of Al13 in 1960. The molecular structure consists of [AlO4Al12(OH)12(OC2H4OH)12]Cl7·H2O units with chelating mono-anionic ethylene glycol units replacing one bridging and one terminal oxygen site.

Azine-Linked Covalent Organic Framework (COF)-Based Mixed-Matrix Membranes for CO2 /CH4 Separation.

Mixed-matrix membranes (MMMs) comprising Matrimid and a microporous azine-linked covalent organic frameworks (ACOF-1) were prepared and tested in the separation of CO2 from an equimolar CO2 /CH4 mixture. The COF-based MMMs show a more than doubling of the CO2 permeability upon 16 wt % ACOF-1 loading together with a slight increase in selectivity compared to the bare polymer. These results show the potential of COFs in the preparation of MMMs.

High-Yielding Green Hydrothermal Synthesis of Ruthenium Nanoparticles and Their Characterization.

Using hydrothermal techniques, a novel synthetic approach to prepare ruthenium nanoparticles has been developed. At 180 degrees C and under autogenous pressure, starting from an aqueous solution of ruthenium trichloride, the method yielded nanoparticles whose form and size both depended on the reducing agent: sodium citrate (hexagonal shaped nanocrystals, 1-20 nm), ascorbic acid (spherical nanoparticles, 3-5 nm) and succinic acid (spherical nanoparticles, 1-120 nm). Depending on the reaction variables, the nature and concentration of partially reduced species determines the characteristics of the final products. HRTEM image analysis along with the simulation techniques were stabilized preferential growth of nanoparticles on specific directions. Ruthenium samples have been investigated by Temperature-Programmed Reduction (TPR) showing that the reduction temperature of nanoparticles is correlated to their nanocrystalline size.

Tris(bipyridine)Metal(II)-Templated Assemblies of 3D Alkali-Ruthenium Oxalate Coordination Frameworks: Crystal Structures, Characterization and Photocatalytic Activity in Water Reduction.

A series of 3D oxalate-bridged ruthenium-based coordination polymers with the formula of {[ZII(bpy)3][MIRu(C2O4)3]}n (ZII = Zn2+ (1), Cu2+ (3, 4), Ru2+ (5, 6), Os2+ (7, 8); MI = Li⁺, Na⁺; bpy = 2,2'-bipyridine) and {[ZnII(bpy)3](H2O)[LiRu(C2O4)3]}n (2) has been synthesized at room temperature through a self-assembly reaction in aqueous media and characterized by single-crystal and powder X-ray diffraction, elemental analysis, infrared and diffuse reflectance UV⁻Vis spectroscopy and thermogravimetric analysis. The crystal structures of all compounds comprise chiral 3D honeycomb-like polymeric nets of the srs-type, which possess triangular anionic cages where [ZII(bpy)3]2+ cationic templates are selectively embedded. Structural analysis reveals that the electronic configuration of the cationic guests is affected by electrostatic interaction with the anionic framework. Moreover, the MLCT bands gaps values for 1⁻8 can be tuned in a rational way by judicious choice of [ZII(bpy)3]2+ guests. The 3D host-guest polymeric architectures can be used as self-supported heterogeneous photocatalysts for the reductive splitting of water, exhibiting photocatalytic activity for the evolution of H2 under UV light irradiation.

Structural Effects in Visible-Light-Responsive Metal-Organic Frameworks Incorporating ortho-Fluoroazobenzenes.

The ability to control the interplay of materials with low-energy photons is important as visible light offers several appealing features compared to ultraviolet radiation (less damaging, more selective, predominant in the solar spectrum, possibility to increase the penetration depth). Two different metal-organic frameworks (MOFs) were synthesized from the same linker bearing all-visible ortho-fluoroazobenzene photoswitches as pendant groups. The MOFs exhibit different architectures that strongly influence the ability of the azobenzenes to isomerize inside the voids. The framework built with Al-based nodes has congested 1D channels that preclude efficient isomerization. As a result, local light-heat conversion can be used to alter the CO2 adsorption capacity of the material on exposure to green light. The second framework, built with Zr nodes, provides enough room for the photoswitches to isomerize, which leads to a unique bistable photochromic MOF that readily responds to blue and green light. The superiority of green over UV irradiation was additionally demonstrated by reflectance spectroscopy and analysis of digested samples. This material offers promising perspectives for liquid-phase applications such as light-controlled catalysis and adsorptive separation.

Experimental Evidence of Negative Linear Compressibility in the MIL-53 Metal-Organic Framework Family.

We report a series of powder X-ray diffraction experiments performed on the soft porous crystals MIL-53(Al) and NH2-MIL-53(Al) in a diamond anvil cell under different pressurization media. Systematic refinements of the obtained powder patterns demonstrate that these materials expand along a specific direction while undergoing total volume reduction under an increase in hydrostatic pressure. The results confirm for the first time the Negative Linear Compressibility behaviour of this family of materials recently predicted from quantum chemical calculations.

Electronic metal-support interactions in single-atom catalysts.

The synthesis of single-atom catalysts and the control of the electronic properties of catalytic sites to arrive at superior catalysts is a major challenge in heterogeneous catalysis. A stable supported single-atom silver catalyst with a controllable electronic state was obtained by anti-Ostwald ripening. An electronic perturbation of the catalytic sites that is induced by a subtle change in the structure of the support has a strong influence on the intrinsic reactivity. The higher depletion of the 4d electronic state of the silver atoms causes stronger electronic metal-support interactions, which leads to easier reducibility and higher catalytic activity. These results may improve our understanding of the nature of electronic metal-support interactions and lead to structure-activity correlations.

Series of 2D heterometallic coordination polymers based on ruthenium(III) oxalate building units: synthesis, structure, and catalytic and magnetic properties.

A series of 2D ruthenium-based coordination polymers with hcb-hexagonal topology, {[K(18-crown-6)]3[M(II)3(H2O)4{Ru(ox)3}3]}n (M(II) = Mn (1), Fe (2), Co (3), Cu (4), Zn (5)), has been synthesized through self-assembly reaction. All compounds are isostructural frameworks that crystallize in the monoclinic space group C2/c. The crystal packing consists of a 2D honeycomb-like anionic mixed-metal framework intercalated by [K(18-crown-6)](+) cationic template. Dehydration processes take place in the range 40-200 °C exhibiting two phase transitions. However, the spontaneous rehydration occurs at room temperature. Both hydrated and dehydrated compounds were tested as Lewis acids heterogeneous catalysts in the acetalyzation of benzaldehyde achieving high yields with the possibility to be recovered and reused. All the investigated materials do not show any long-range magnetic ordering down to 2 K. However, the Fe-based compound 2 presents a magnetic irreversibility in the ZFC-FC magnetization data below 5 K, which suggest a spin-glass-like behavior, characterized also by short-range ferromagnetic correlations. The coercive field increases as the temperature is lowered below 5 K, reaching a value of 1 kOe at 2 K. Alternating current measurements obtained at different frequencies confirm the freezing process that shows weak frequency dependence, being characteristic of a system exhibiting competing magnetic interactions.

Bis(2,2'-bipyridyl-κ(2)N,N')dichlorido-rhodium(III) perchlorate.

The asymmetric unit of the title compound, [RhCl(2)(C(10)H(8)N(2))(2)]ClO(4), consists of one unit of the cationic complex [RhCl(2)(bipy)(2)](+) and one uncoordinated perchlorate anion. The Rh(III) atom is coordinated by four N atoms from two bipyridyl ligands and two Cl atoms, forming a distorted octa-hedral environment. The Cl ligands are cis. Two intramolecular C-H⋯Cl hydrogen bonds occur in the cationic complex . In the crystal, mol-ecules are linked together by a hydrogen-bond network involving the H atoms of bipyridyl rings and perchlorate anions. An O atom of the perchlorate anion is disordered over two sites, with an occupancy-factor ratio of 0.78 (3):0.22 (3).